- Knowledge Base
- FAQs
- FAQ, Garden systems
- Does the 3.2 litre (EZ1010HB) EZ-FLO come with a hose fitting or is it just the tank?
- Does the 3.2 litre (EZ1010HB)unit come with the Flo Disc Kit?
- How do I hook up the 3.2 litre (EZ1010HB) to an irrigation sprinkler valve?
- Installed a automatic timer with pressure at 420 kPa followed by a 200kPa reducer feeding my drip. Where would you recommend installing this?
- There’s a lot of info on drip irrigation, but what about soaker hose watering?
- Running several drip lines together, at about 6 to 8 litres per minute. Is this enough flow rate for it to work properly?
- Can the 2.8 litre be used with a sprinkler instead of irrigation system?
- What is a vacuum breaker ? Does my back flow preventer provide the same function?
- I have an EZ-FLO unit that states not to keep under pressure. with the 3.2 litre, can I place it before the timer, leaving the hose on all the time?
- Does the 2.8 litre system work with a venturi valve?
- Do I need to depressurize the tank after every time I water? In that case it won’t be a set and forget.
- Can I just put this inline with regular water hose?
- Can I simply connect a garden hose to this first and than to my normal lawn sprinkler with a garden hose connection?
- Would the EZ 1010HB work with a handheld spray nozzle?
- Could I use this to apply liquid fertiliser onto lawns, with a garden hose attached to it?
