Skip to main content
- EZ-FLO 3.2L Options
- EZ-FLO – Bob’s Irrigation – GemLife Installation
- Ezee Bore Cleanse MSDS
- Feed Rates
- EZKIT Instructions
- EZKIT Information
- Cap Connector Repair
- Video: Dynamic Suspension Timelapse
- EZ-FLO Upgrade Kits
- Winterising your EZ-FLO Fertigation Injection System
- What is an EZ-FLO Fertigation Injection System?
- How To Fix a Leaking Tube EZ-FLO
- How To Fix a Leaking PRV
- How EZ-FLO Works + How To Install Mainline System
- EZ-FLO High Capacity Unit – Fill Process
- EZ-FLO Commercial Fertigation Tanks
- EZ-FLO Promotion
- EZ-FLO Coupling Ball Valve Quick Setup
- EZ-FLO Creating Pressure Differential
- Will I over fertilise?
- Is it easy to use?
- Will the system clog drip irrigation?
- If product is mixed with water, will it dilute?
- Will the fertiliser stain?
- How do I winterize the system?
- The system did not inject any fertiliser
- Does the 3.2 litre (EZ1010HB) EZ-FLO come with a hose fitting or is it just the tank?
- Does it come with tubing?
- Does the 3.2 litre (EZ1010HB)unit come with the Flo Disc Kit?
- How do I know that the EZ-FLO is working?
- How do I know when to refill?
- How often do I need to refill?
- Can I use organic products in the EZ-FLO system?
- How Do I Know When The Fertiliser Is Gone?
- No fertiliser left, but The Tank Is Full Of Water
- My System Is Running But The line Is Still Clear
- My System Is Feeding Too Fast
- How Much Product To Put Into The Tank?
- What Fertiliser Product Can I Use?
- What cap setting should I use?
- Can off/on valves be put in fertiliser line to turn off when you don’t want fertilise?
- What is the length of the tubing to attach this to my tap? My tap are probably half a meter off the ground…
- Is the outlet side of the unit a standard hose fitting?
- Can you use this with drip irrigation?
- How do I hook up the 3.2 litre (EZ1010HB) to an irrigation sprinkler valve?
- Installed a automatic timer with pressure at 420 kPa followed by a 200kPa reducer feeding my drip. Where would you recommend installing this?
- Does the nutrient concentration remain constant or decrease over time if water enters the reservoir due to dilution?
- If I have it on the lowest setting (slow) how often do I have to refill the tank?
- It seems like this design is much more suited to drip than to hose watering as the concentration becomes less and less as time goes on. Your thoughts?
- Why does the fertiliser become more diluted?
- Supposedly this has 4 settings for mixture, what are the mix ratios for each of the settings?
- How does the mixing adjustment work ? Can I adjust it to add 1 drop per litre of water ?
- There’s a lot of info on drip irrigation, but what about soaker hose watering?
- Running several drip lines together, at about 6 to 8 litres per minute. Is this enough flow rate for it to work properly?
- Can the 2.8 litre be used with a sprinkler instead of irrigation system?
- What is a vacuum breaker ? Does my back flow preventer provide the same function?
- I have an EZ-FLO unit that states not to keep under pressure. with the 3.2 litre, can I place it before the timer, leaving the hose on all the time?
- Does the 2.8 litre system work with a venturi valve?
- Do I need to depressurize the tank after every time I water? In that case it won’t be a set and forget.
- What size backflow preventer do I need?
- Can I just put this inline with regular water hose?
- Can I simply connect a garden hose to this first and than to my normal lawn sprinkler with a garden hose connection?
- Would the EZ 1010HB work with a handheld spray nozzle?
- Could I use this to apply liquid fertiliser onto lawns, with a garden hose attached to it?
- Do you Sell Fertiliser as well?
- Is an EZ-FLO unit hard to install?
- How To Set Up: Residential EZ-FLO Tanks
- My System Is Feeding Too Fast
- Why is Fertigation my Best Option!
- How Much Product Should I Put In The Tank?
- Why Does Water Come Into The Tank When I Turn On The System?
- If I Fertilise Every Time I Water, Won’t I Over Fertilise?
- Can I Use Pesticides And Herbicides In The System?
- How Plants Can Be Healthier With Less Fertiliser?
- How Do I Know When The Tank Is Ready To Refill?
- The Advantages of using EZ-FLO rather than the Alternatives
- Microdosing With EZ-FLO, Your Plants Prefer it.
- What Is EZ-FLO, Why Is It The Better Option?
- How To Set Up: Main-Line Systems
- Can I Use EZ-FLO systems For Green Walls
- How To Set Up: High Capacity Systems
- How To Set Up: HiFLO Systems
- How To Set Up: CBV Ball Valve Couplings
- How To Set Up: The EZ-FLO CAP
- Using 100% Liquid Fertilisers
- Quick Fill Guide: High Capacity Tanks
- Quick Fill Guide: Main-Line Tanks
- Will EZ-FLO reduce my Tap Pressure or Flow?
- How Do I Know The System Is Working?
- My Fertiliser Is Gone But The Tank Is Full Of Water
- How to Insert and Remove Tubing to the Head/Cap
- What is Backflow?
- Video: How to install Main-line system
- Video: How to set up your EZ-FLO
- Video: CBV ball valve adapter calibration schematic
- Video: Lo-Flow discs
- Video: How to install our hose and drip feeder
- How does fertigation affect my plants or lawn?
- What sizes of landscape can EZ-FLO service?
- What kind of irrigation heads work with the EZ-FLO unit?
- Installation and Operation Guide Coupling Ball Valve
- What size of landscapes can EZ-FLO service?
- How Do I Know When The Fertiliser Is Gone?
- Quick Fill Guide: Residential and Main-Line Tanks
- Hose Drip Installation And Operating Guide
- Instructions EZFLO1 To 005FX Models
- How Can I Tell If My EZ-FLO System is Flowing?
- How do I Compare EZ-FLO to Other Fertigation Systems or Landscape Injectors?
- How Does Fertigation Affect My Plants or Lawn?
- What Kind of Maintenance do EZ-FLO Units Require?
- Is an EZ-FLO Unit Hard to Install? Is it Easy to Use?
- Why are EZ-FLO proportioning systems better than other methods of application?
